Phantom VEO-E 340L

• Phantom VEO-E cameras are compact, lightweight and built for efficient image capture.  The 340 model captures at over 800 frames-per-second at four megapixel resolution.
• Features include Programmable I/O, HDMI video, Canon EOS lens support.

• 3 Gpx/second
• Max speed at full resolution of 2560 x 1600 is 800 fps
• Max speed at reduced resolution of 128 x 4 is 280,000 fps
• Max speed of 340L-E225 is 225,000 fps
• Minimum frame rate of 24 fps

• CMOS sensor
• 2560 x 1600 pixels
• 10 µm pixel size
• 12-bit depth
• TE cooled
• CAR in 128 x 4 increments

• EMVA 1288 measurements at 532nm
  • Quantum Efficiency: 60.2% mono; 43.6% color
  • Max. SNR: 41.6 dB
  • AST (p) 40.4 mono; 54.1 color
  • Saturation Capacity (e-): 14512 mono; 14335 color
  • Temporal Dark Noise: 23.8 e-
  • Dynamic Range: 55.5 dB

• 1 µs minimum exposure
• Global electronic shutter
• Exposure Index (E.I.) for controlling apparent ISO
• Extreme Dynamic Range (EDR)
• Auto Exposure
• Shutter Off mode for PIV

• 18 GB, 36 GB high-speed internal RAM

7.5 seconds at maximum frame rate, largest resolution and into maximum internal memory

• Segment memory for up to 63 cines in multi-cine mode
• Continuous recording
• Programmable I/O
• HD-SDI and HDMI video
• Event marking
• Frame timestamp (IRIG SMPTE or MISP)
• IRIG in/out (modulated and unmodulated)
• Shutter off mode for PIV exposure
• 1.71 μs straddle time
• Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
• Image-Based Auto-Trigger (IBAT)
• One 12 VDC, 6W auxiliary power port
• Secondary IP address
• Field-based firmware upgrades

• Programmable trigger location (pre/post trigger recording)
• Image-Based Auto-Trigger
• Trigger from software
• Hardware trigger BNC
• High Voltage (HV) trigger compatible

• Frame synchronization to internal or external clock (FSYNC)
• IRIG in/out (modulated or unmodulated)

• Dedicated Trigger and Timecode In BNCs on camera body
• Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more

• Gb Ethernet for control and data downloads.
• Standard RJ45 port.

• Phantom Camera Control (PCC)
• SDK available

• 3G HD-SDI and HDMI on all VEO models.
• Supports up to 1080p60.

• Nikon F-mount standard, supports F & G style lenses
• Canon EOS mount optional
• PL-mount optional
• C-mount optional
• (lens not included)

• Brightness
• Gain
• Gamma
• Saturation
• White Balance
• Pedestal
• Tone curve
• Filters
• Color matrix
• Image flip and rotate
• Crop
• Scale

National Instruments M- and X-Series DAQ modules with integrated support in PCC

• Basic measurements via Phantom Application:
• Distance
• Speed
• Acceleration
• Angles and Angular Speed
• Manual and Automatic point collection for target tracking
• Compatible with 3rd party solutions

• Cine RAW & Cine Compressed
• AVI
• h.264 mp4
• Apple ProRes .mov
• Multipage TIFF
• MXF PAL & MXF NTSC
• Uncompressed QuickTime
• Windows BMP
• LEAD
• JPEG
• JTIF
• RAW
• DNG
• DPX

• 100 – 240 VAC, 16-32 VDC via primary power input.
• 80 Watt 24V power supply included

• Size (without lens):5 x 5 x 4.4″ (127 x 127 x 111 mm) (L x W x H);
• Weight: 4 lbs (1.8 Kg)

• Operating Temperature: -10°C – 50°C
• Shock:MIL-STD-202G Method 213-B. Rated
  • 30G with shutter;
  • 100G without shutter;
  • sawtooth wave, 11ms, +/- 10 pulses all axes(60 total)
• Vibration: Rated 12Grms; Figure 2A-1, Test Condition D,15 min per axis(without lenses)

• Phantom SDK
• LabView
• MatLab

• Ethernet cable
• • Power Supply with XLR Power Cable

• Canon EOS lens mount
• PL-mount
• C-mount