| Resolution | FPS |
|---|---|
| 2560 x 1600 | 1,100 |
| 2560 x 1440 | 1,230 |
| 1920 x 1080 | 2,100 |
| 1280 x 1280 | 2,510 |
| 512 x 512 | 11,900 |
| 256 x 256 | 32,700 |
| 256 x 64 | 100,500 |
| 128 x 4 | 290,000 |
Common resolutions and frame-rates, other resolutions available.
Short Description
- Phantom VEO cameras are compact, rugged and full of premium features. The 440 model captures at over 1,000 frames-per-second at four megapixel resolution.
- Programmable I/O, SDI video, Canon EOS lens support and optional CFast 2.0 recording media are just a few of the features you will appreciate.
- Available in both L and S styles.
Throughput/Speed
- 4 Gpx/second
- Max speed at full resolution of 2560 x 1600 is 1,100 fps
- At 1920 x 1080 the VEO 440 captures over 2,100 fps
- Max speed at reduced resolution of 128 x 4 is 290,000 fps
- Max speed of 440-E225 model is 225,000 fps
- Min frame rate of 24 fps
Sensor Specifications
- CMOS sensor
- 2560 x 1600 pixels
- 10 µm pixel size
- 12-bit depth
- TE cooled
- CAR in 128 x 4 increments
- EMVA 1288 measurements at 532nm
- Quantum Efficiency: 60.2% mono; 43.6% color
- Max. SNR: 41.6 dB
- AST (p) 40.4 mono; 54.1 color
- Saturation Capacity (e-): 14512 mono; 14335 color
- Temporal Dark Noise: 23.8 e-
- Dynamic Range: 55.5 dB
Exposure
- 1 µs minimum exposure
- Global electronic shutter
- Exposure Index (E.I.) for controlling apparent ISO
- Extreme Dynamic Range (EDR)
- Auto Exposure
- Shutter Off mode for PIV
Memory
- 18 GB, 36 GB, 72 GB high-speed internal RAM
- On-board removable CFast 2.0 cards (S-models) up to 512GB
Record Times
- 11.4 seconds at maximum frame rate, largest resolution and into maximum internal memory
Special Features
- 10Gb Ethernet (optional)
- Segment memory for up to 63 cines in multi-cine mode
- Continuous recording
- Programmable I/O
- HD-SDI and HDMI video
- Event marking
- Frame timestamp (IRIG SMPTE or MISP)
- IRIG in/out (modulated and unmodulated)
- Shutter off mode for PIV exposure
- 1.71 μs straddle time
- Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
- Image-Based Auto-Trigger (IBAT)
- One 12 VDC, 6W auxiliary power port
- Secondary IP address
- Field-based firmware upgrades
Triggering
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger
- Trigger from software
- Trigger from on-camera controls (S-model)
- Hardware trigger BNC
- High Voltage (HV) trigger compatible
Timing and Synchronization
- Frame synchronization to internal or external clock (FSYNC)
- IRIG in/out (modulated or unmodulated)
Signaling
- Dedicated Trigger and Timecode In BNCs on camera body
- Range Data input on S-model camera body (Fischer)
- Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more
Connectivity
- Control and download connections
- Gb Ethernet (standard);
- 10Gb Ethernet (optional)
- Fischer port on S-models; RJ45 port on L-models
Camera Control
- On-Camera Controls (OCC) on S-model camera
- Phantom Camera Control (PCC)
- SDK available
Video Out
- 3G HD-SDI and HDMI on all VEO models.
- Additional 3G HD-SDI BNC port on back of S-model.
- Supports up to 1080p60.
Lensing
- Nikon F-mount standard, supports F & G style lenses
- Canon EOS mount optional
- PL-mount optional
- C-mount optional
- (lens not included)
Video Processing
- Brightness
- Gain
- Gamma
- Saturation
- White Balance
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
Data Acquisition
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
Supported File Formats
- Cine RAW, Cine Compressed, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Power
- 100 – 240 VAC, 16-32 VDC via primary power input.
- 80 Watt 24V power supply included
- Secondary power input, down to 12V via capture port on S-model cameras
Mechanical Specifications
- Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm
- Weight: 5.6 lbs (2.5 kg)
Environmental Specifications
- Operating Temperature: -10°C – 50°C
- Shock:MIL-STD-202G Method 213-B. Rated 30G with shutter; 100G without shutter; sawtooth wave, 11ms, +/- 10 pulses all axes (60 total)
- Vibration: Rated 12Grms; Figure 2A-1, Test Condition D, 15 min per axis (without lenses)
APIs
- Phantom SDK
- LabView
- MatLab
Ships Standard With
- Ethernet cable
-
- Power Supply with XLR Power Cable
Options
- Canon EOS lens mount
- PL-mount
- C-mount
Popular Accessories
- Handle
- Cheese Plate
- Battery mounts (S-models)
- Cameo VEObob for added power outputs and remote port (S-model)
- Case with custom foam
