Standard Mode
| Resolution | FPS |
|---|---|
| 1280 x 960 | 10,860 |
| 1280 x 804 | 12,900 |
| 1280 x 720 | 14,350 |
| 960 x 960 | 13,333 |
| 640 x 480 | 30,030 |
| 320 x 240 | 57, 360 |
| 320 x 120 | 105,260 |
| 320 x 24 | 316,930 |
| 320 x 12 | 423,350 |
Binning Mode
| Resolution | FPS |
|---|---|
| 640 x 480 | 40,300 |
| 640 x 240 | 73,510 |
| 320 x 240 | 105,260 |
| 320 x 120 | 180,680 |
| 320 x 72 | 253,270 |
| 320 x 24 | 423,350 |
Common resolutions and frame-rates, other resolutions available.
- Phantom VEO cameras are compact, rugged and full of premium features. The 1310 captures at over 10,800 frames-per-second at 1.2 Megapixel resolution.
- Programmable I/O, SDI video, Canon EOS lens support and optional CFast 2.0 recording media are just a few of the features you will appreciate.
- Available in both L and S styles.
Throughput/Speed
- 13 Gpx/sec
- Max speed at full resolution of 1280 x 960 is 10860 fps
- Max speed at reduced resolution of 160×24 is 316,900 (standard) and 423,300 fps (binned mode, mono output only)
- Max speed of 1310-E225 model is 225,000 fps
- Minimum frame rate of 50 fps
Sensor Specifications
- CMOS sensor
- 1280 x 960 pixels
- 18 µm pixel size
- 23 mm x 17.3 mm
- 12-bit depth
- Sensor incorporates correlated double sampling (CDS)
- CAR in 640 x 12 increments
- EMVA 1288 measurements at 532nm
- Standard Mode:
- Quantum Efficiency: 71.6% mono; 53.3% color
- Max. SNR: 40.7 dB
- AST (p) 19.8 mono; 24.2 color
- Saturation Capacity (e-): 11700 mono; 21024 color
- Temporal Dark Noise: 13.65 e-
- Dynamic Range: 58.3 dB
- Binned Mode:
- Quantum Efficiency: 63.8%
- Max. SNR: 43.7 dB
- AST (p) 46.7
- Saturation Capacity (e-): 23183
- Temporal Dark Noise: 29.27 e-
- Dynamic Range: 57.8 dB:
- Binned Mode is Mono Output Only
Exposure
- Minimum Exposure:
- 1 µs (standard)
- 709 ns minimum exposure with FAST option (export controlled)
- Global electronic shutter
- Exposure Index (E.I.) for controlling apparent ISO
- Auto Exposure
- Shutter Off mode for PIV
Memory
- 18 GB, 36 GB, 72 GB high-speed internal RAM
- On-board removable CFast 2.0 cards (S-models) up to 512GB
Record Times
- 3.7 seconds at maximum frame rate, largest resolution, and into maximum internal memory
Special Features
- 10Gb Ethernet (optional)
- Binned mode for higher fps at 640 x 480 and below, mono output only
- Segment memory for up to 63 cines in multi-cine mode
- Continuous recording
- Programmable I/O
- HD-SDI and HDMI video
- Event marking
- Frame timestamp (IRIG SMPTE or MISP)
- IRIG in/out (modulated and unmodulated)
- Shutter off mode for PIV exposure
- 726 ns straddle time
- Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
- Image-Based Auto-Trigger (IBAT)
- One 12 VDC, 6W auxiliary power port
- Secondary IP address with DHCP Support
- Field-based firmware upgrades
Triggering
- Programmable trigger location (pre/post trigger recording)
- Image-Based Auto-Trigger
- Trigger from software
- Trigger from on-camera controls (S-model)
- Hardware trigger BNC
- High Voltage (HV) trigger compatible
Timing and Synchronization
- Frame synchronization to internal or external clock (FSYNC)
- IRIG in/out (modulated or unmodulated)
Signaling
- Dedicated Trigger and Timecode In BNCs on camera body
- Range Data input on S-model camera body (Fischer)
- Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and moreobe, event, trigger output, ready and more
Connectivity
- Gb Ethernet (standard)
- 10Gb Ethernet (optional)
- For control and data downloads:
- Fischer port on S-models
- RJ45 port on L-models
Camera Control
- On-Camera Controls (OCC) on S-model camera
- Phantom Camera Control (PCC)
- SDK available
Video Out
- 3G HD-SDI and HDMI on all VEO models
- Additional 3G HD-SDI BNC port on back of S-model
- Supports up to 1080p60
Lensing
- Nikon F-mount standard, supports F & G style lenses
- Canon EOS mount optional
- PL-mount optional
- C-mount optional
- (lens not included)
Video Processing
- Brightness
- Gain
- Gamma
- Saturation
- White Balance
- Pedestal
- Tone curve
- Filters
- Color matrix
- Image flip and rotate
- Crop
- Scale
Data Acquisition
- National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
- Basic measurements via Phantom Application:
- Distance
- Speed
- Acceleration
- Angles and Angular Speed
- Manual and Automatic point collection for target tracking
- Compatible with 3rd party solutions
Supported File Formats
- Cine RAW & Cine Compressed
- AVI, h.264 mp4
- Apple ProRes .mov
- Multipage TIFF
- MXF PAL & MXF NTSC
- Uncompressed QuickTime
- Windows BMP
- OS/2 BMP, PCX, TGA
- TIFF, LEAD, JPEG
- JTIF, RAW, DNG, DPX
Power
- 100 – 240 VAC, 16-32 VDC via primary power input
- 80 Watt 24V power supply included
- Secondary power input, down to 12V via capture port on S-model cameras
Mechanical Specifications
- Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm (L-model)
- Weight: 6 lbs (2.7 kg) (L-model); 6.6 lbs (3.0 kg) (S-model)
Environmental Specifications
- Operating Temperature: -10°C – +50°C
- Storage Temperature: -20°C – +70°C
- Shock:MIL-STD-202G Method 213-B. Rated 30G with shutter; 100G without shutter; sawtooth wave, 11ms, +/- 10 pulses all axes (60 total)
- Vibration: Rated 12Grms; Figure 2A-1, Test Condition D, 15 min per axis (without lenses)
APIs
- Phantom SDK
- LabView
- MatLab
Ships Standard With
- Ethernet cable
-
- Power Supply with XLR Power Cable
Options
- Canon EOS lens mount
- PL-mount
- C-mount
Popular Accessories
- Handle
- Cheese Plate
- Battery mounts (S-models)
- Case with custom foam
