Phantom T4040

• The Phantom T4040 camera captures up to 9,350 fps at full 4.2-Mpx resolution and has all of the features of the T-Series family.
• Binned mode combines pixels for higher frame rates with a max resolution of 1280 x 832.
• FAST option is available for exposure times down to 250 ns

• 39.8 Gpx/second
• Standard Mode Max Speeds:
  • 2560 x 1664  9,350 fps (full resolution)
  • 2560 x 32  444,440 fps
• Binned Mode Max Speeds:
  • 1280 x 832  37,200 fps (full binned resolution)
  • 1280 x 64  444,440 fps
• Minimum Frame rate is 100 fps

• • CMOS Back Side Illuminated (BSI) Sensor
  • 2560 x 1664 pixels
  • 9.27 µm pixel size, 18.54 µm with binning enabled
  • 23.7 mm x 15.4 mm; 28.2mm diagonal
  • 12-bit depth
  • CAR in 512 x 32 increments,

256 x 64 in Binned modes

• • EMVA 1288 measurements at 532nm
  • Standard Mode:
    • Quantum Efficiency: 85.4% mono; 71% color
    • Max. SNR: 39.9 dB
    • AST (p) 28.4 mono; 37.1 color
    • Saturation Capacity (e-): 9703 mono; 11733 color
    • Temporal Dark Noise: 23.7 e-
    • Dynamic Range: 52.0 dB
  • Binned Mode:
    • Quantum Efficiency: 82.4%
    • Max. SNR: 45.4 dB
    • AST (p) 76.2
    • Saturation Capacity (e-): 34684
    • Temporal Dark Noise: 62.2 e-
    • Dynamic Range: 54.8 dB

*Binned Mode is Mono Output Only

• 1.04 µs minimum exposure standard, 250 ns minimum exposure with FAST option (export controlled)
• Global electronic shutter
• Extreme Dynamic Range (EDR)
• Auto Exposure
• Exposure Index (E.I.) for controlling apparent ISO
• Shutter Off mode for PIV

• 64GB, 128GB, 256GB high-speed internal RAM.
• Up to 63 memory partitions.
• CineMag 5 for non-volatile storage

• 4.3 seconds at maximum frame rate, 12 bits, 2560 x 1664 resolution into 256GB internal memory

• 10Gb Ethernet
• Binned mode for double the vertical resolution at high frame rates (Output is monochrome)
• Multi-cine mode and up to 63 memory segments
• Continuous recording
• Event marking
• Frame timestamp
• IRIG In (modulated and unmodulated)
• IRIG Out (unmodulated)
• Sync-to-Trigger
• Shutter off mode for PIV exposure
• 364 ns straddle time in PIV mode
• Burst mode
• Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
• DHCP or Secondary IP address
• Field-based firmware upgrade capable

• Programmable trigger location (pre/post trigger recording)
• Image-Based Auto-Trigger standard
• Trigger from software
• Hardware trigger BNC
• High Voltage (HV) trigger compatible

• Timing resolution <20ns
• Frame synchronization to internal or external clock (FSYNC)
• IRIG in/out (modulated or unmodulated)
• Ready output (high when camera is armed and ready to record)
• Strobe output (low during frame exposure time)

• Dedicated Trigger, Timecode In ports
• Dedicated Remote port for RS232
• Dedicated Range Data
• 3 Programmable I/O ports includes adjustable (assign and define) signals including:
  • F-sync
  • strobe
  • event
  • trigger output
  • ready and more

• Gb Ethernet
• 10Gb Ethernet (auto-negotiating)
• WiFi via USB Dongle for control (option to order from factory to permanently disable WiFi)

• Phantom Camera Control software (PCC)
• On-Camera Controls standard
• SDK available

• 2X 3G HD-SDI ports
• Micro-HDMI
• Supports up to 1080p60.

• Nikon F-mount standard, supports F & G style lenses
• Canon EOS mount optional
• PL-mount optional
• C-mount optional
• M42-mount optional
• (lens not included)

• Brightness
• Gain
• Gamma
• Saturation
• White Balance
• Pedestal
• Tone curve
• Filters
• Color matrix
• Image flip and rotate
• Crop
• Scale

• National Instruments M- and X-Series DAQ modules with integrated support in PCC

• Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions

• Cine RAW & Cine Compressed
• AVI, h.264 mp4
• Apple ProRes .mov
• Multipage TIFF
• MXF PAL & MXF NTSC
• Uncompressed QuickTime
• Windows BMP
• OS/2 BMP, PCX, TGA
• TIFF, LEAD, JPEG
• JTIF, RAW, DNG, DPX

• 100 – 240 VAC, 280 Watt power supply included
• 20 – 28 VDC secondary power input on back panel

• 5 x 5 x 8.25 inches, 12.7 x 12.7 x 21 cm (H, W, L) without handle or lens.
• Handle adds 2″(5 cm) to height
• Weight: 9.4 lbs, 4.3 kg

• Operating Temperature: -10 to +50 C
• Storage Temperature: -20 to + 70 C
• Regulatory(EMI/EMC/ESD):
  • Emissions:  EN 61326-1, FCC part 15
  • Immunity: EN 61326-1
• Shock:
  • Operational: 30G, 11mSec sawtooth, 3 axes, 60 pulses total.
• Vibration:
  • Operational:7.5 Grms, 50Hz-2KHz, 3axes, IAW MIL-STD-202H.
• Safety: IEC 60950-1

• Phantom SDK, C#, C++
• LabView
• MatLab
• Python

• Ethernet Cable
• Power Supply with XLR Power Cable

• CineMag interface
• FAST Option

• Case with custom foam
• CineMag 5
• CineStation IV
• Video monitor