Phantom T3610

Phantom T3610

At its full 1 Mpx resolution of 1280 x 800 the Phantom T3610 captures over 38,000 fps. This  38 Gpx/second throughput is maintained through its full range for a top frame rate of 875,000 fps at both 1280 x 32 (standard mode) and 640 x 64 (binned mode). Binned mode increases the vertical resolution of the camera’s top frame rates by combining the sensor pixels 2×2. Binned mode is included on both mono and color T3610 cameras, however the output will switch to mono when used on a color camera.

The frame rates provided by the T3610 are sought after for combustion, impact testing, spray dynamics, shock wave analysis and other applications that benefit from sub-microsecond exposure times. The T3610 custom BSI sensor delivers on all fronts, including the ability to shoot in environments with limited supplemental light.

The T3610 includes premium features to enable a variety of applications including:

  • EDR (Extreme Dynamic Range) provides flash mitigation for ballistic studies by dynamically adjusting exposure in saturated areas of the image.
  • Programmable I/O to interface with DAQ systems and a variety of measurement sensors, which can be recorded and viewed as metadata in Cine files.
  • Remote, standalone operation is achieved by using the on-camera controls, video monitor and CineMag.
Key Features
  • Binning Mode – frame rate boost at 640 x 384 and below
  • CineMag 5 Compatibility
  • SDI and HDMI video outputs
  • Programmable I/O – Assign and define camera signals
  • 10Gb Ethernet
What’s in the box?
  • Power supply with XLR power cable
  • Ethernet Cable
Standard Mode
Resolution FPS
1280 x 800 38,040
1280 x 640 46,250
1280 x 320 94,590
1280 x 192 156,710
1280 x 128 233,330
1280 x 32 525,000
Binned Mode
Resolution FPS
640 x 384 156,710
640 x 320 187,500
640 x 256 233,330
640 x 192 308,820
640 x 128 456,520
640 x 64 525,000
  • Common resolutions and frame-rates, other resolutions available.
  • The Phantom T3610 camera captures up to 38,040 fps at full 1-Mpx resolution and has all of the features of the T-Series family.
  • Binned mode combines pixels for higher frame rates at 640 x 384 and below.
Throughput/Speed
  • 38 Gpx/second
  • Standard Mode Max Speeds:
    • 1280 x 800 38,040 fps (full resolution)
    • 1280 x 32 525,000 fps (875,000 fps with FAST option)
  • Binned Mode Max Speeds:
    • 640 x 384 156,710 fps (full binned resolution)
    • 640 x 64 525,000 fps (875,000 fps with FAST option)
  • Minimum Frame rate is 100 fps
Sensor Specifications
  • CMOS Back Side Illuminated (BSI) Sensor
  • Color, Monochrome, or UV-Extended options
  • 1280 x 800 pixels
  • 18.5 µm pixel size, 37 µm with binning enabled
  • 23.7 mm x 14.8 mm; 27.94mm diagonal
  • 12-bit depth
  • CAR in 256 x 32 increments,  128 x 64 in Binned modes
    • EMVA 1288 measurements at 533nm
    • Standard Mode:
      • Quantum Efficiency: 84.3% mono; 77.0% color
      • Max. SNR: 39.98 dB
      • AST: 23.9 e- mono; 26.6 e- color
      • Saturation Capacity (e-): 9675 mono; 9968 color
      • Temporal Dark Noise: 23.4 e-
      • Dynamic Range: 52.15 dB
    • Binned Mode:
      • Quantum Efficiency: 83%
      • Max. SNR: 45.8 dB
      • AST: 56.3 e-
      • Saturation Capacity (e-): 37882
      • Temporal Dark Noise: 55.8 e-
      • Dynamic Range: 56.55 dB

*Binned Mode is Mono Output Only

Exposure
  • 1.1 µs minimum exposure standard, 190 ns minimum exposure with FAST option (export controlled)
  • Global electronic shutter
  • Extreme Dynamic Range (EDR)
  • Auto Exposure
  • Exposure Index (E.I.) for controlling apparent ISO
  • Shutter Off mode for PIV
Memory
  • 64GB, 128GB, 256GB high-speed internal RAM.
  • Up to 63 memory partitions.
  • CineMag V for non-volatile storage (not available at launch)
Record Times
  • 4.5 seconds at maximum frame rate, 12 bits, 1200 x 800 resolution into 256GB internal memory
Special Features
  • 10Gb Ethernet
  • Binned mode for double the vertical resolution at high frame rates (Output is monochrome)
  • Multi-cine mode and up to 63 memory segments
  • Continuous recording
  • Event marking
  • Frame timestamp
  • IRIG In (modulated and unmodulated)
  • IRIG Out (unmodulated)
  • Sync-to-Trigger
  • Shutter off mode for PIV exposure
  • 230 ns straddle time in PIV mode
  • Burst mode
  • Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
  • DHCP or Secondary IP address
  • Field-based firmware upgrade capable
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger standard
  • Trigger from software
  • Hardware trigger BNC
  • High Voltage (HV) trigger compatible
Timing and Synchronization
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG in/out
  • Ready output (high when camera is armed and ready to record)
  • Strobe output (low during frame exposure time)
Signaling
  • Dedicated Trigger, Timecode In ports
  • Dedicated Remote port for RS232
  • Dedicated Range Data
  • 3 Programmable I/O ports includes adjustable (assign and define) signals including:
    • F-sync
    • strobe
    • event
    • trigger output
    • ready and more
Connectivity
  • Gb Ethernet and 10Gb Ethernet for control and data downloads
  • WiFi via USB Dongle for control (option to order from factory to permanently disable WiFi)
Camera Control
  • Phantom Camera Control (PCC)
  • On-Camera Controls (OCC)
  • SDK available
Video Out
  • 2X 3G HD-SDI ports
  • Micro-HDMI
  • Supports up to 1080p60.
Lensing
  • Nikon F-mount standard, supports F & G style lenses
  • Canon EOS mount optional
  • PL-mount optional
  • C-mount optional
  • M42-mount optional
  • (lens not included)
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • White Balance
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
    • Distance
    • Speed
    • Acceleration
    • Angles and Angular Speed
    • Manual and Automatic point collection for target tracking
    • Compatible with 3rd party solutions
Supported File Formats
  • Cine RAW & Cine Compressed
  • AVI, h.264 mp4
  • Apple ProRes .mov
  • Multipage TIFF
  • MXF PAL & MXF NTSC
  • Uncompressed QuickTime
  • Windows BMP
  • OS/2 BMP, PCX, TGA
  • TIFF, LEAD, JPEG
  • JTIF, RAW, DNG, DPX
Power
  • 100 – 240 VAC, 280 Watt power supply included
  • 20 – 28 VDC secondary power input on back panel
Mechanical Specifications
  • 5 x 5 x 8.25 inches, 12.7 x 12.7 x 21 cm (H, W, L) without handle or lens.
  • Handle adds 2″(5 cm) to height
  • Weight: 9.4 lbs, 4.3 kg
Environmental Specifications
  • Operating Temperature: -10 to +50 C
  • Storage Temperature: -20 to + 70 C
  • Regulatory(EMI/EMC/ESD):
    • Emissions:  EN 61326-1, FCC part 15
    • Immunity: EN 61326-1
  • Shock:
    • Operational: 30G, 11mSec sawtooth, 3 axes, 60 pulses total.
  • Vibration:
    • Operational:7.5 Grms, 50Hz-2KHz, 3axes, IAW MIL-STD-202H.
  • Safety: IEC 60950-1
APIs
  • Phantom SDK, C#, C++
  • LabView
  • MatLab
Ships Standard With
  • Ethernet Cable
  • Power Supply with XLR Power Cable
Options
  • CineMag interface
  • FAST Option
  • CineMag 5
Popular Accessories
  • Case with custom foam
  • CineMag 5
  • CineStation IV
  • Video monitor

Related products