L7-T Tungsten LED Fresnel

L7-T Tungsten LED Fresnel

  • 3,200K Tungsten Balance
  • Active Fan/Heat Sink Cooling
  • On-board Controls
  • DMX Control
  • Sliding Stirrup
  • Upgradeable Via USB
  • Long Life LEDs
  • Very Low Electrical Draw
Optical System
Focusable Fresnel
Light Source
LED
Lamp Life
50,000 Hours
Lens Diameter
7.0″ (175 mm)
Beam Angle
15 – 50° (Half peak angle)
Mount
Adjustable sliding stirrup, high strength tilt lock
1 1/8″ (28 mm) Junior spigot
Adjustments
Tilt: +/- 90°
Operating Voltage
100 – 250VAC, 50/60Hz
Power Consumption
160W Nominal, 220W maximum
Connection
Edison plug
Color Range
3,200K
Continuously adjustable full minusgreen to full plusgreen
Estimated color shift over time: < 200K
CRI
CRI 94 3,200K
Dimming
Continuous: 100 – 0%
Control
5-Pin DMX in and through
Optional on-board controller
Mini-USB: DMX setup, fixture status and firmware upgrade through PC software
Remote Device Management (RDM): DMX setup, hour counter and standard RDM commands
Cooling
Active Fan/Heat Sink
Fan stays on during operation
Weather Resistance
IP20, optional IP23
Operating Temperature
-4 to 113°F (-20 to 45°C)
Certification
CE, GS, FCC, cNRTL, CB, ISO9001:2000 CE, GS, FCC, cNRTL, CB, ISO9001:2000 CE, GS, FCC, cNRTL, CB, ISO9001:2000
Finish
Blue, black, silver aluminum
Dimensions
Including yoke, not including Junior pin
16.6 x 14.7 x 13.7 – 17.8″ (42.3 x 37.4 x 34.9-45.4 cm) (flood – spot focus)
(flood – spot focus)
Lens diameter: 7.0″ (175 mm)
Weight
18.1 lb (8.2 kg)

Related products